MTORRES

MTorres Tissue

From reels to rolls

 

 

Tail Sealers

Consumer - TAILTECH60 CON

 

The TAILTECH60 CON tail sealer applies a line of glue on open tissue logs. It is dedicated to consumer products with a diameter range of 90 mm (3.5”) to 200mm (7.9”) and can reach the speed of 60 logs/min.

 

Tailtech60 Con MTorres Tissue

 

Model Speed Log Diameter
TAILTECH15 PRO Up to 15 logs/min 120-350 mm (4.7” – 13.8”)
TAILTECH60 CON Up to 60 logs/min 90-200 mm (3.5” –  7.9”)
TAILTECH50 SWING Up to 50 logs/min 90-350 mm (3.5” - 13.8”)

 

Tail Sealers

Professional - TAILTECH15 PRO

 

The TAILTECH15 PRO tail sealer is specifically designed for professional products, and applies a line of glue on logs with a diameter range of 120 mm (4.7”) to 350 mm (13.8”), and a maximum of 15 logs/min.  The patented system is comprised of a shaft with rotating arms that positions the log in the gluing station. No mechanical adjustment is required to change log diameters. Sealing of the log is accomplished by a glue gun. All main movements of the tail sealer are controlled by servo motors.

 

Tailtech15 Pro

 

Model Speed Log Diameter
TAILTECH15 PRO Up to 15 logs/min 120-350 mm (4.7” – 13.8”)
TAILTECH60 CON Up to 60 logs/min 90-200 mm (3.5” –  7.9”)
TAILTECH50 SWING Up to 50 logs/min 90-350 mm (3.5” - 13.8”)

 

Tail Sealers

Consumer & Professional - TAILTECH50 SWING

 

The TAILTECH50 SWING can be used for both consumer and professional products, with an extended range of 90 mm (3.5”) to 350 mm (13.8”). This version can reach the speed of 50 logs/min. The tail is opened by means of two rolls.  Two belts (upper and lower) transport the open log to the gluing area.  When the log reaches the slot on the glue tank, a blade is activated and applies glue to the entire log. Two sealing rolls generate pressure on the log, thus closing the tail. The log is then pushed towards the accumulator through speed differential of the rolls.  By varying the speed of the rolls it is possible to position the glued tail so that no contamination is generated on the  accumulator buckets.

 

Model Speed Log Diameter
TAILTECH15 PRO Up to 15 logs/min 120-350 mm (4.7” – 13.8”)
TAILTECH60 CON Up to 60 logs/min 90-200 mm (3.5” –  7.9”)
TAILTECH50 SWING Up to 50 logs/min 90-350 mm (3.5” - 13.8”)