CTS Series Splicers
Splice Unit
Unit with a double preparation and splice station, and horizontal movement to be moved to the various preparation positions. Versions for overlap splice (without tail) and butt splice.
Vacuum splice preparation
Vacuum system for quick splice preparation, with various configurations depending on the paper weights.
Photocell splice triggering
Allows emergency splice triggering at the end of the roll, initiating the splice cycle automatically in case of web breakage or the paper leaving the core.
Web tension regulation
Dancer roller activated by 1 hydropneumatic cylinder, the same used in the model CTS-B.
Dancer roller activaded by 2 pneumatic cylinder and electronic position control; this is the system used in the Model CTS-E.
Flywheel
Based on the principles of classic mechanics, it improves the splice reliability with low weight papers and it is necessary for end of the roll splice initiation by means of photocells
DATA: The most reliable splicer in the market with thousands of units installed all over the world.
Control panel
The operating panel with centralised controls facilitates the execution and the visualisation of the operations.
The touch screen is the basic element for programming of functions and the verification of errors in a high performance machine, that allows total control: meter counter, special fluting take-up factors, acceleration and deceleration ramps, and brake torque used (installed in the model CTS-E).
By means of a password, access is obtained to parameters that facilitate the maintenance of the machine.
All splicer models have lateral controls for the preparation of the rolls.
Electric control cabinet
Depending on the type of machine, the control can be by means of relays, in the most basic versions, or by various PLC models, with which complicated calculation functions can be made with a view to the correct brake control. In more sophisticated versions of the series it is possible to communicate via a modem to supervise the machine by our technicians without the need to travel.
Types: CTS Series splicers
The most reliable splicer in the market with thousands of units installed all over the world.
High level of performance and reliability with low maintenance costs.
Its traditional mechanical construction is mantained, being enhanced with the latest developments in electronic technology.
3 different versions easily upgradeable to increase speed and performance.
Main feature
Tradition and Innovation
Its traditional mechanical construction is maintained being enhanced with the latest developments in electronic technology.

Types: CTS series splicers
-
3 different versions easily upgradeable to increase speed and performance.
CTS-A
- Basic model.
- Manual brake control.
-
Recommended for low speed installations.
CTS-B
- Advanced brake control.
- Recommended for medium speed installations.
- Automatic tension control.
CTS-E
- Electronic brake control system.
- Latest PLC Version.
- Automatic web tension control.
Splice, Load and Unload
- Automatic splice.
- Splice speed up to 100 m/min (330 fpm).
- Stop time 0 sec.
- Automatic core unloading.
Reels
-
Reel Speed
Up to 700 m/min., 2,300 fpm. -
Reel Weight
Up to 4.000 kg., 8,800 lb.
-
Max. Reel Diameter
Generally 12'', 16'', 24'' ó 32''. -
Paper Width
2.850 mm., 112''.