LTS-590 is a medium-high speed and high performance splicer with different configurations for different splice speeds requirements. It is ideal for plasterboard lines, paperboard and other rigid materials to be unwound in different process as laminating, printing and coating-extrusion and other.
LTS-590 splicer in its typical configuration is suitable for floor pick-up unwinds.
LTS-590 uses horizontal motion to move to the different splice preparation positions. Thanks to a vacuum system in the preparation bars and to an ergonomic design the operator can make the splice preparation easy and rapid. Versions for overlap splice (without tail) and butt splice are available.
DATA: Ability to work with the option “RUNNING OFF the core”, it means, the paper can be run out the core completely.
Depending on splice speed requirement the splicer can incorporate a double, triple or quadruple festoon for paper storage and feeds the web at top speed during the ‘zero-speed’ splice cycle. All rollers are aluminum rollers with surface treatment where needed.
The festoon consists of a floating system of rollers coupled to a clutch. The exit paper web tension is electronically controlled.
Web tension control
The second function of the festoon is to act as a dancer roller during the unwinding process to keep the web tension constant, and absorb any sudden tension variations that might occur.
A Pull&Brake unit controlled by an AC motor with frequency variator helps to control electronically the web tension. During the splice cycle the Pull&Brake unit accelerates the new roll, maintaining the web tension constant at the exit of the splicer.
PULL & BREAK Unit
Controlled by an AC motor with frequency variator, its speed depends on the line speed, corrected by the equilibrium position of the festoon. During the splice cycle it accelerates the new roll, maintaining the web tension constant at the exit of the splicer at all times.
- Transfer is made at ‘zero-speed’ allowing the production line to remain at top speeds, increasing productivity and decreasing waste.
- Maximum performance and reliability.
- Butt splice or overlap without tail.
- Constant web tension.
Programmable automatic splicing:
- By counter meter or diameter.
- At end of reel.
- Easy threading.
- Touch screen control panel.
Splice, Load and Unload
- Automatic splicer.
- Splicing speed 470 m/min (1540 fpm).
- Production speed up to 600 mpm
- Stop time 0 sec.
- Automatic core unloading.
2.800 mm., 110''.
Max. Reel diameter
2.185 mm., 85''.
You'll find all the technical information specified in the product catalog.